SiteSync Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to Connect Multitech Conduit to Chirpstack Instance ======

===== You will need: =====
  * A Multitech Conduit Gateway
  * Running Chirpstack Instance
  * Network connection between Gateway and Chirpstack Instance

==== Conduit Gateway Configuration ====

Log into your Conduit. In the LoRa>Network menu, select Packet Forwarder.

Open the Server menu. Enter the URL of your running Chirpstack instance. Make the ports 1700 both ways.
Save and apply.

==== Add Gateway to Chirpstack ====

Log into your Chirpstack instance. Navigate to Gateways.

Click Add Gateway.

It will ask for your Conduit Gateway's ID, you can find this in your Conduit's interface, under LorA/Netowrk.

Paste and save. 

Chirpstack will send a message every 30 seconds to the Conduit Gateway to confirm the connection, which will reflect in the Chirpstack Gateway page on the status. 

=== Troubleshooting ===

**What if I don't see a Last Seen At on this gateway in Chirpstack?** This means the Conduit and Chirpstack cannot see each other, check the firewall for UPD 1700 between the Chirpstack instance and the Conduit.

**What if Chirpstack says my gateway is in the wrong regional band, for example EU868 vs US915?** This is a setting in your chirpstack.toml file, or chirpstack-gateway-bridge.toml, set your regional preference there.